Battery Rail Flat Car
KPX series battery powered rail flat car introduction:
KPX series battery electric flat car is an electric flat car powered by a battery.
The battery is installed on the flat car to directly provide power to the traction DC motor.
Compared with the AC motor, the DC motor has the advantages of not being damaged, large starting torque and strong overload capacity.
Battery electric flat car:
- Product model: KPX series;
- Duty tonnage: 6-100 tons;
- Power supply mode: battery;
- Running speed: 20-30 m/min
KPX series battery powered rail flat car picture:
KPX series battery powered rail flat car technical parameters:
| name | Main technical parameters of KPX series battery powered flat car | ||||||||||||||
| Model | KPX-5-2 | KPX-10-2 | KPX-5-1 | KPX-10-1 | KPX-20-1 | KPX-30-1 | KPX-50-1 | KPX-75-1 | KPX-100-1 | ||||||
| load(t) | 5t | 10t | 5t | 10t | 20t | 30t | 50t | 75t | 100t | ||||||
| Countertop size (mm) | long | 3200 | 3600 | 3200 | 3600 | 4000 | 4500 | 5000 | 5800 | 6500 | |||||
| width | 1600 | 1600 | 2000 | 2000 | 2200 | 2200 | 2500 | 2500 | 2800 | ||||||
| high | 550 | 550 | 500 | 550 | 650 | 650 | 700 | 850 | 900 | ||||||
| speed (m/min) | ~20-25 | ~18-22 | |||||||||||||
| Motor power (kw) | 2.5 | 3.0 | 5 | 6.3 | 10 | ||||||||||
| Storage pool | Model | DG250 | |||||||||||||
| Specification | 212 × 140 × 335 | ||||||||||||||
| voltage | 2V/only | ||||||||||||||
| working voltage | 40 volts | 48volts | 78 volts | ||||||||||||
| self-esteem (t) | 3.4 | 3.9 | 3.95 | 4.38 | 5.3 | 6.7 | 8.2 | 11.2 | 14.3 | ||||||
| Gauge (mm) | 762 | 1435 | |||||||||||||
Video of Battery Powered Railcar
KPX series battery powered rail flat advantages:
KPX series battery track electric flat car is currently a widely used flat car. In addition to the characteristics of KPJ and KPD series products, it also has good safety performance and maneuverability. It can travel on curves and forks, and the running distance is not limited.
The requirements for track laying are not high, there are no insulation requirements, and the construction is convenient and low-cost.
Single-girder crane Packaging
Commentaries
“Battery powered track levellers work great without the tether of a power cord.”
—Mark
FAQ
The range of a battery-powered rail leveller on a single charge depends on the battery capacity and load, and is typically between 3 and 8 hours.
The time it takes for a railcar battery to fully charge depends on its capacity. It usually takes several hours, ranging from 4 to 8 hours. It is possible to buy more spares and use them interchangeably.
The maximum load capacity of a rail leveller depends on customer demand. It usually ranges from 1 to 200 tonnes.
The speed at which such battery-powered rail flatcars travel on the tracks typically ranges from 5 metres to 20 metres per minute.
The control system of this battery powered rail leveller is designed to be user friendly and intuitive. There are three modes of operation: wireless remote control/wired handle/remote operation.
