Hydraulic Goods Lift
Product introduction of the goods lift:
The rail-mounted goods lift is a non-scissor type hydraulic goods lift, which is a very widely used vertical transportation equipment for goods.
Load capacity: 0.3 – 30T, elevation: 3 – 20M.
The goods lift drives the oil pump through the motor and relies on the oil cylinder to drive the heavy chain to drive the hydraulic goods lift to rise and fall smoothly.
Due to the use of hydraulic pressure as the lifting power, it has the characteristics of large load capacity and stable lifting.
The chain rail-mounted goods lift is widely used in the vertical transportation of goods between high-rise buildings in construction.
Pictures of Hydraulic Cargo Lift
Features of the goods lift product:
The rail-mounted hydraulic goods lift adopts cylinder and chain transmission, and has fewer moving parts, so the maintenance workload is less than that of the scissor-type hydraulic goods lift;
the rail-mounted hydraulic goods lift has a compact structure and uses fewer bearings than the scissor-type hydraulic, and its service life is much longer than that of the scissor-type hydraulic goods lift;
the rail-mounted hydraulic goods lift adopts hydraulic transmission, so the load capacity is relatively large;
the transmission height of the rail-mounted hydraulic goods lift is much higher than that of the scissor-type hydraulic goods lift, up to dozens of meters, and the stability is also better than that of the scissor-type hydraulic goods lift;
the descent of the rail-mounted hydraulic goods lift uses its own weight and the weight of the goods, so it is more economical to operate than the ordinary goods lift;
the hydraulic goods lift adopts a programmable controller, which can realize intelligent control and display, and at the same time the circuit is simple and the failure rate is low.
Video of Hydraulic Cargo Lift
Uses of the goods lift:
The goods lift is mainly used for the up and down transportation of goods between various working floors;
in narrow spaces that are relatively difficult to solve such as multi-story buildings in three-dimensional garages and underground garages, places where it is impossible to excavate a pit, occasions where the top floor height cannot meet the requirements, etc.
The hydraulic system of the product is set with anti-falling and interactive interlocking of the upper and lower floor doors.
Operation buttons can be set on each floor and the work surface of the lifting platform to realize multi-point control.
The product has a solid structure, a large carrying capacity, stable lifting, and simple and convenient installation and maintenance.
It is an economical and practical ideal goods conveying equipment to replace the elevator between low floors.
By choosing different optional configurations according to the installation environment and usage requirements of the lifting platform, a better usage effect can be achieved.
External protection of hydraulic goods lifts
The rail-mounted goods lift series products are mainly used for the up and down transportation of goods between multiple floors in workshops and warehouses. This product is customized according to the user’s on-site space, load capacity, and lifting height.
The rail-mounted goods lift has a solid structure and a long service life. Operation buttons can be set on each floor and the work surface of the lifting platform to realize multi-point control.
The upper and lower floor doors are interactively interlocked, and the floor doors can be connected.
The inside and outside of the factory building can be pierced through each other, which is convenient and space-saving. It is the most economically and safely ideal lifting equipment for transporting goods in modern high-rise buildings to replace elevators.
hydraulic goods lifts Packaging
Commentaries
“Hydraulic cargo lifts solve our cargo handling problems.”
—Gracie
FAQ
The maximum capacity of these hydraulic cargo lifts ranges from 1 to 10 tonnes. Please refer to the product specification for details.
The height range this hydraulic cargo lift can reach varies. It typically ranges from a few meters to tens of meters. Specific details depend on the model and its configuration.
Ensure that theThe ascending and descending speed of this hydraulic cargo lift depends on its design. Generally, it can range from a few meters per minute to tens of meters per minute.
The hydraulic lift cargo lifts usually have safety devices such as emergency stop button, overload protection, safety rails, fall arrester and limit switches to ensure safe operation.
Yes, it can often be customized. We can adjust the dimensions and features to meet your specific needs. Just provide your detailed requirements and we’ll do our best to accommodate.
